Novell Server Consolidation and Migration Toolkit 1.1, Administration Manual, Page: 27 / 126

Installing the Server Consolidation and Migration Toolkit
3
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
27
3
Installing the Server Consolidation
and Migration Toolkit
To install the Novell
®
Server Consolidation and Migration Toolkit, complete the tasks in the
following sections:
• Section 3.1, “Meeting the Workstation Requirements,” on page 27
• Section 3.2, “Installing the Server Consolidation and Migration Toolkit,” on page 28
• Section 3.3, “Uninstalling the Server Consolidation and Migration Toolkit,” on page 29
• Section 3.4, “What’s Next,” on page 29
3.1 Meeting the Workstation Requirements
The Server Consolidation and Migration Toolkit runs on a Windows workstation on the network.
This workstation must meet the requirements outlined in this section.
‰ Windows XP Professional Edition or Windows 2000 with Service Pack 3 or later
The utilities in the Toolkit do not run on Windows XP Home Edition, Windows NT, or
Windows 95/98.
NOTE: If you have have Windows XP Professional Service Pack 2, you will see an error
stating that the Server Consolidation and Migration Toolkit software has not been digitally
signed when you run the installation program. You can safely ignore this message and continue
installing the Toolkit.
‰ 100 MB of available disk space
‰ Novell Client
TM
4.91 for Windows 2000/XP with the latest Support Pack
To check the Novell Client version, right-click the N icon on the workstation toolbar and then
click
Novell Client Properties > Client . To download the latest client, see the Novell
Downloads page (http://www.novell.com/download) .
You must also make the following settings in your Novell Client software:
• Disable file caching
Right-click the N icon, then click Novell Client Properties > Advanced Settings > File
Caching > Setting: Off .
• (Conditional) Enable UTF-8 support if you are copying extended ASCII (multinational
characters) or double-byte character set (oriental languages) data
Right-click the N icon, then click
Novell Client Properties > Advanced Settings > Use
UTF8 encoding and NCPs > Setting: On .
• (Conditional) If you are copying data from NetWare
®
4 servers, you must configure the
Novell Client software to support the IPX
TM
protocol. See the Novell Client 4.91 for
Windows 2000/XP documentation (http://www.novell.com/documentation/noclienu/
index.html)
for more information.