Novell Sentinel Rapid Deployment 6.1, Installation Manual

Page: 39 / 84

Installing Sentinel 6.1 Rapid Deployment 39
no
vd
ocx
(e
n)
17
Sep
te
m
be
r 20
09
IMPORTANT: You can modify the -Xmx value in the
configuration.xml
file to
change the RAM allocated to the Collector Manager process. The
configuration.xml
file is placed in the
< Install_Directory >/config
on Linux or
< Install_Directory >\config
on Windows.
Custom Memory Configuration: Click Configure to fine-tune memory allocations. This
option is only available if there is sufficient memory on the machine.
11 Click Next .
A summary screen with the features selected for installation is displayed.
12 Click Install .
13 After the installation, you are prompted to enter the username and password that are used by
the ActiveMQ JMS strategy to connect to the broker.
Use the username collectormanager, and its corresponding password that is available in the
/
opt/novell/sentinel6_rd_x86-64/config/activemqusers.properties
file on the
Sentinel server.
An example for the credentials available in the
activemqusers.properties
is given below:
collectormanager=cefc76062c58e2835aa3d777778f9295
Where,
collectormanager
is the username and
cefc76062c58e2835aa3d777778f9295
is
the corresponding password.
You must use the collectormanager user and its corresponding password during the Collector
Manager service installation. In this case, the
collectormanager
user has the access rights
only to the required communication channels for the Collector Manager operations.
14 After installation, you are prompted to reboot or to log in again and start the Sentinel services
manually. Click
Finish to reboot your system.
NOTE: When you log in again, use the username you specified in Step 8 .
If you forget the username you have set, open a terminal console and enter the following
command with
root
credentials.
env | grep ESEC_USER
This command returns the username if the user is already created and the environment
variables are already set.
4.7 Manually Starting and Stopping the Sentinel
Services
To start the Sentinel services manually, use either of the following commands:
To stop the Sentinel services manually, use either of the following commands:
Platform Command
Linux < Install_Directory >/bin/sentinel.sh start
Windows
< Install_Directory >/bin/sentinel.bat start