Novell PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009, Configuration Manual

Page: 15 / 36

Preparing PlateSpin Orchestrate for High Availability Support 15
no
vd
ocx
(e
n)
13
Ma
y 20
09
SAN configuration is beyond the scope of this document. For information about setting up a SAN,
see the
Oracle Cluster File System 2 (http://www.novell.com/documentation/sles10/sles_admin/
data/ocfs2.html) documentation in the SLES 10 Administration Guide .
IMPORTANT: PlateSpin Orchestrate requires a specific mount point for file storage on the SAN.
Use
/zos
(in the root directory) for this mount point.
1.2.5 Installing and Configuring PlateSpin Orchestrate on the
First Clustered Node
This section includes information about installing the Orchestrate Server components, configuring
those components using two possible methods, and then checking the configuration:
Š “Installing the Orchestrate Server YaST Patterns on the Node” on page 15
Š
“Running the PlateSpin Orchestrate Configuration Script” on page 16
Š “Running the PlateSpin Orchestrate Configuration Wizard” on page 19
Š
“PlateSpin Orchestrate Configuration Information” on page 24
Š “Checking the Configuration” on page 27
Installing the Orchestrate Server YaST Patterns on the Node
NOTE: As you prepare to install PlateSpin Orchestrate 2.0 and use it in a high availability
environment, make sure that the requirements to do so are met. For more information, see “ Planning
the Orchestrate Server Installation ” in the PlateSpin Orchestrate 2.0 Installation and Configuration
Guide .
The PlateSpin Orchestrate Server (Orchestrate Server) is supported on SUSE Linux Enterprise
Server 10 Service Pack 2 (SLES 10 SP2) only.
To install the PlateSpin Orchestrate Server packages on the first node of the cluster,
1 Download the appropriate PlateSpin Orchestrate Server ISO (32-bit or 64-bit) to an accessible
network location.
2 (Optional) Create a DVD ISO (32-bit or 64-bit) that you can take with you to the machine
where you want to install it or use a network install source.
3 Install PlateSpin Orchestrate software:
3a Log in to the target SLES 10 SP2 server as
root
, then open YaST2.
3b In the YaST Control Center, click Software , then click Add-on Product to display the Add-
on Product Media dialog box.
3c In the Add-on Product Media dialog box, select the ISO media ( Local Directory or DVD )
to install.
Š
(Conditional) If you are using a DVD, select DVD , click Next , insert the DVD, then
click Continue .
Š
(Conditional) If you are using a directory, select Local Directory , click Next , select
the ISO Image check box, browse to ISO on the file system, then click OK .
3d Read and accept the license agreement, then click Next to display YaST2.