manualshive.com logo in svg

Novell PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009, Configuration Manual

Share
Download
Novell PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009 Configuration Manual Download Page 13

Preparing PlateSpin Orchestrate for High Availability Support

13

no

vd

ocx 

(e

n)

  

13

 Ma
y 20

09

1.2.3  Configuring Nodes with Time Synchronization and 
Installing Heartbeat 2 to Each Node

When you have installed the high availability packages to each node of the cluster, you need to 
configure the Network Timing Protocol (NTP) and Heartbeat 2 clustering environment on each 
physical machine that participates in the cluster.

Š

“Configuring Time Synchronization” on page 13

Š

“Configuring Heartbeat 2” on page 13

Configuring Time Synchronization

To configure time synchronization, you need to configure the nodes in the cluster to synchronize to a 
time server outside the cluster. The cluster nodes use the time server as their time synchronization 
source.

NTP is included as a network service in SLES 10 SP2. Use the 

time synchronization instructions 

(http://www.novell.com/documentation/sles10/heartbeat/data/b5ez1wc.html)

 in the 

SLES 10 

Heartbeat Guide

 to help you configure each cluster node with NTP.

Configuring Heartbeat 2

Heartbeat 2 is an open source server clustering system that ensures high availability and 
manageability of critical network resources including data, applications, and services. It is a 
multinode clustering product for Linux that supports failover, failback, and migration (load 
balancing) of individually managed cluster resources.

Heartbeat 2 packages are installed with the high availability pattern on the SLES 10 SP2 install 
source. For detailed information about configuring Heartbeat 2, see the 

installation and setup 

instructions  (http://www.novell.com/documentation/sles10/heartbeat/index.html?page=/
documentation/sles10/heartbeat/data/b3ih73g.html)

 in the 

SLES 10 Heartbeat Guide

 (http://

www.novell.com/documentation/sles10/heartbeat/data/heartbeat.html)

.

An important value you need to specify in order for Heartbeat 2 to be enabled for high availability is 
configured in the 

Default Action Timeout

 field on the settings page of the Heartbeat 2 console 

(hb_gui).

Summary of Contents for PLATESPIN ORCHESTRATE 2.0.2 - HIGH AVAILABILITY CONFIGURATION GUIDE 06-17-2009





































Reviews:

No comments

Brands by name

Popular brands

Load more brands