Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS Administration Manual Download Page 60

Page: 60 / 93

SLES 10 Storage Administration Guide for EVMS

ocx (

NU)

Jan
uar
y 2
007

For IA-64 platforms, this step is necessary to make the

RAID 4/5

option available in the

Regions Manager.
For information about creating segments, see

Section 4.4, “Creating Disk Segments (or

Partitions),” on page 36

Select

Action > Create > Segment

to open the

DOS Segment Manager

Select the free space segment you want to use.

Specify the amount of space to use for the segment.

Specify the segment options, then click

Create

Create and configure a software RAID Device.

Select

Action > Create > Region

to open the Create Storage Region dialog box.

Specify the type of software RAID you want to create by selecting one of the following
Region Managers, then click

Next

MD RAID 0 Region Manager

MD RAID 1 Region Manager

MD RAID 4/5 Region Manager

From the Storage Objects listed, select the ones to use for the RAID device.

IMPORTANT:

The order of the objects in the RAID is implied by their order in the list.

Summary of Contents for LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS






























































































Search results

Summary of Contents for LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS

Reviews:

Related manuals for LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS

Brands by name

Popular brands

Novell LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS, Administration Manual

Search results

Summary of Contents for LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS

Reviews:

Related manuals for LINUX ENTERPRISE SERVER 10 - STORAGE ADMINISTRATION GUIDE FOR EVMS

Brands by name

Popular brands