manualshive.com logo in svg

Novell LINUX ENTERPRISE DESKTOP 11, Manual

Get the Novell LINUX ENTERPRISE DESKTOP 11 user manual for free from our website. This comprehensive manual will guide you through all the features and functions of the product. Download the manual now to enhance your user experience and make the most out of your device.

Share
Download
background image

28

Support

This chapter outlines maintenance-related tasks. Learn how to update Novell® App-
Armor and get a list of available man pages providing basic help for using the command
line tools provided by Novell AppArmor. Use the troubleshooting section to learn about
some common problems encountered with Novell AppArmor and their solutions. Report
defects or enhancement requests for Novell AppArmor following the instructions in
this chapter.

28.1 Updating Novell AppArmor

Online

Updates for Novell AppArmor packages are provided in the same way as any other
update for SUSE Linux Enterprise Server. Retrieve and apply them exactly like for any
other package that ships as part of SUSE Linux Enterprise Server.

28.2 Using the Man Pages

There are man pages available for your use. In a terminal, enter

man apparmor

to

open the apparmor man page. Man pages are distributed in sections numbered 1 through
8. Each section is specific to a category of documentation:

Support

357

Summary of Contents for LINUX ENTERPRISE DESKTOP 11



































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for LINUX ENTERPRISE DESKTOP 11

NEC NEAX 2000 IVS User Manual preview
NEAX 2000 IVS
Brand: NEC Pages: 81
Tascam Portastudio iPad Application User Manual preview
Portastudio iPad Application
Brand: Tascam Pages: 5
AMX Content Database Editor v 1.0 Manual preview
Content Database Editor v 1.0
Brand: AMX Pages: 28
Omron WS02-NCTC1-E - 07-2001 Operation Manual preview
WS02-NCTC1-E - 07-2001
Brand: Omron Pages: 116
Extreme Networks EPICenter 4.1 Software Installation Manual preview
EPICenter 4.1
Brand: Extreme Networks Pages: 546
Extreme Networks ExtremeWare 7.5 Command Reference Manual preview
ExtremeWare 7.5
Brand: Extreme Networks Pages: 2546
Alpha Moisture Systems SADPmini Logger Instruction Manual preview
SADPmini Logger
Brand: Alpha Moisture Systems Pages: 14
TRENDnet VIP-L16 - Configuration Manual preview
VIP-L16 -
Brand: TRENDnet Pages: 41
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.1 Tuning Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.1
Brand: Red Hat Pages: 160
Oracle Application 9i Configuration Manual preview
Application 9i
Brand: Oracle Pages: 140
MACROMEDIA BREEZE 5 Installation And Configuration Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 100
MACROMEDIA FLASH MX 2004 - ACTIONSCRIPT Reference Manual preview
FLASH MX 2004 - ACTIONSCRIPT
Brand: MACROMEDIA Pages: 816
Quantum GoVault 40GB Software Manual preview
GoVault 40GB
Brand: Quantum Pages: 142
Navigon MN 6 User Manual preview
MN 6
Brand: Navigon Pages: 95
Xerox DocuColor 30 Pro Manual preview
DocuColor 30 Pro
Brand: Xerox Pages: 292
Waves Digital Audio Effects Processor Doubler User Manual preview
Digital Audio Effects Processor Doubler
Brand: Waves Pages: 6
DeLorme Topo USA 8.0 User Manual preview
Topo USA 8.0
Brand: DeLorme Pages: 280
Olympus Studio 1.3 Instruction Manual preview
Studio 1.3
Brand: Olympus Pages: 14

Brands by name

Popular brands

Load more brands