18
GroupWise 7 Gateway for Microsoft Exchange Installation and Administration Guide
no
vd
ocx
(e
n)
6 Ap
ril 20
07
You must enable SNMP during gateway installation. You cannot add this functionality after
installation. In order for the option to be offered during installation, the Windows server where you
install the gateway must have the SNMP service installed.
The SNMP service is usually not included during the initial Windows operating system installation.
To add or configure the SNMP service on the server where you plan to install and run the Exchange
Gateway, you must be logged in as a member of the Administrator group.
To add the SNMP service to a Windows NT server:
1
From the Control Panel, double-click
Network
.
2
Click
Services
, click
Add
, then select
SNMP Service
.
3
Follow the on-screen prompts. You need your original Windows NT media.
You are given the opportunity to configure the SNMP service. The only required information
for the Exchange Gateway is the
Trap Destination
and
Community Name
fields.
4
After the installation is complete, reboot the Windows NT server.
For more information about configuring the SNMP service, see your Windows NT
documentation.
To add the SNMP service to a Windows 2000/2003 server:
1
From the Control Panel, double-click
Add/Remove Programs
.
2
Click
Add/Remove Windows Components
.
3
Select
Management and Monitoring Tools
.
4
Click
Details
, then select
Simple Network Management Protocol
.
5
After the installation is complete, reboot the Windows server.
For more information about configuring the SNMP service, see your Windows documentation.
3.6 Gathering Exchange System Information
If you are using Exchange 5.5, you must know the name of the Exchange 5.5 site where you want to
create the Exchange mailbox through which messages will flow to and from the GroupWise system.
If you are using Exchange 2000/2003, you must know the name of the Exchange server, along with
the name of the mailbox store where you want to create the Exchange mailbox and the name of the
storage group where the mailbox store is located. You must also know the administrative group and
routing group that the server belongs to.
In either case, you must have a list of all servers in your Exchange system. The Exchange Gateway
needs to be installed on only one Exchange server, but the addressing components must be installed
on all Exchange servers. The addressing components generate GroupWise-type addresses for
Exchange users.
EXCHANGE GATEWAY INSTALLATION WORKSHEET
Under
Item 2: Exchange Server Information
, list the Exchange system information required for your
version of Exchange.
Summary of Contents for GROUPWISE 7 GATEWAY FOR MICROSOFT EXCHANGE - INSTALLATION AND ADMINISTRATION
Page 4: ...novdocx en 6 April 2007 ...
