novel XSZ-107T, User And Operational Manual

Page: 9 / 17

9 | P a g e
7.
Connecting the power cords
•
The cables and power cords are vulnerable when bent or twisted;
never subject the power cords to excessive force.
•
Set the main switches to the off “0” position before
connecting any of the power cords.
•
Insert the power cord jack into the power of the microscope unit
Safely.
7.1 Charging of Battery and switching on
•
The “I“ position power is ON. You can use the unit plugged in, and
the battery will charge while in use.
•
The “II” position indicator renders the power as OFF. You cannot
use incident illumination as the LED will be off. If plugged in
the internal battery unit will automatically charge.
•
“0” power is OFF. There will be no charging of the battery and no
illumination of the LED even if the unit is plugged in to the AC
mains power supply.
Once charging of the internal battery has commenced, a red power
indicator shall be observed. If the internal battery has reached its full
charge capacity, the red light will extinguish and a green light will
appear. Once in use, if one disconnects from the main AC power – the
internal battery will hold enough current to illuminate the LED for up
to 8 hours without requiring a re-charge.
If the battery is completely drained, the microscope can be
used, plugged into the wall outlet. It is used on the same
application as a laptop.
•
Red Light - When charging the microscope, if the LED
power indicator light is red, the battery is not fully
charged.
•
Green Light - When the LED power indicator light green,
the battery is fully charged.
•
If the unit has been stored for more than a week without any
AC power, it is advisable to charge the unit up over a
minimum of 18 hours before normal operation.
Insert the power cord into the epi- fluorescence power module safely
- Or -
Insert the power cord into the battery backup epi-florescence power
module safely. If the battery backup epi-florescence power module has
been stored for more than a week without any AC power, it is advisable to
charge the unit up over a minimum of 18 hours before normal operation.