Abnormal smell mist
New unit
Take out water tank, open
cover, let it stay 12 hours
in cool position
Dirty water or water
sitting too long
Clean water tank, fill with
clear water
Power lamp on, unit
doesn’t work
Too much water in the
water basin
Pull out same water from
the water basin, close the
cover of water tank tightly
Mist fog is too low
Too much scale in the
water basin
Clean transducer
Water is too dirty or water
kept too long in the tank
Clean water tank, change
to fresh clear water
Abnormal noise
Resonant in water tank
when water is too low
Fill water into water tank
Unit is on a unstable
surface
Move the unit to a stable
flat surface
Mist fog coming out from
around nozzle
There are apertures
between the nozzle and
water tank
Dip the nozzle in water for
a while and then fix it to
the socket on water tank
TECHNICAL DATA
Model: UH-2100
Power supply: 220-240V 50/60Hz
Heating power: 80W
Humidify power: 30W
Total power: 110W
Water tank capacity: 5.5L
Evaporation Rate: ≥300ml/H
Noise level: ≤35dB(A)
*
Maintenance:
In a case when the water is hard which means water contains too much calcium and
magnesium, it can cause a “white powder” problem and leave heavy scales on the surface
of water basin, transducer ,and inner surface of the water tank. Scales on the surface of
transducer will unable the unit to work properly.
We recommend:
Use cold boiled water or distilled water.
Clean the transducer, water tank and basin unit every week.
Change the water in water tank more often to keep it fresh.
Make sure to pull out the water from the water tank and dry the water basin before you
store the unit unused for a long period of time.
Clean the whole unit and make sure that all parts of the unit are dried completely before
unused for longer period of time.
How to clean the transducer:
16.
Put 5-10 drops of cleaning abluent on the surface of the transducer, wait for 2-5
15