1. Cation exchange resin filter can soften the hard water.
*Operation Instruction
First Operation, put unit in the room temperature for half of an hour before
running.
It is recommended to use the unit under temperature of 20 degree C, relative
humidity less than 80
％
RH.
Use clear water not over 40 degree C
Check the water basin, make sure it is clear.
INSTRUCTIONS FOR USAGE:
1. Put the machine on a flat surface.
2. When you take out of the water tank, you must be turn on the child safety lock
3. Fill the water into the water tank, and then tighten the tank cover.
4. Put the water tank on the main base, and turn off the child safety lock.
5. Check if the rated voltage meets the input voltage, and plug into the socket. Then
display shows the current temperature and humidity.
Touch the symbol POWER
on the machine; the background LED light will be on.
The machine will begin to work in AUTO mode. Display shows AUTO symbol.
Display shows AUTO symbol. The device determines the optimal humidity by the
formula in auto mode and starts to achieve it at maximum power. When the current
humidity less than the table showed humidity, it is in high speed operation. When
the humidity arrived, the machine will be in sleeping state.
Temperature of the air,
degrees Celsius
Humidity, %
≤19
70
20-21
65
22-23
60
24-25
55
26-27
50
28-29
40
30-32
35
33-36
30
37 and higher
25
The device checks the accordance of the temperature level and the humidity level
every 15 minutes.
6. Touch the symbol PLASMA
, the Plasma generator works. On the LED display,
it shows the shape of trees
. Touch again to stop the function.
7. Touch the symbol HEATING
, the warm mist will come out after 10~15 minutes.
On the LED display, it shows the same symbol
. Touch again to stop the
function. Mist will become cool.
8. Touch the symbol LIGHT
, water tank indication light will be off. Touch again to
switch on.
9. Constant humidity: Before you touch the symbol HUMIDITY
, LED display shows
the current humidity. You may set the humidity arranged from 30%RH to 75%RH.
Touch once, AUTO mode is cancelled and the symbol %RH will blink, it will
increase by 5%RH. When it reaches 75%RH, touch again, it will show “Co” and
13
