N'oveen HC3299 WiFi, User Manual

Page: 13 / 23

13
1.Set time
WEEK Press
“Set” button again,“Mo”light twinkle ,press “
two buttons set the week
from Mo--Su (Mo=Monday...Su=Sunday ect.)
HOUR Press
“Set” button one time,LED display front “00” twinkle, press“
two buttons
set the Hours from 01--00(01=1 o
’clock,02=2 o’clock...00=24 o’clock ect.)
MINUTE Press
“Set” button again,LED display behind “00” twinkle, press “
two
buttons set the minutes from 00--59(01=1 Minute,02=2 Minute ect.)
2)General Using OPERATION
1. Turn the heater ON by pressing remote control the ON/OFF button ,the unit will blow the
cold air .
2. Pressing the
“MODE” button on remote control ,the unit will blow the warm air and
will light on.
3. Pressing the
“MODE” button second times on remote control,the unit will blow the hot air
and the will light on
4.Pressing the
“MODE” button Three times on remote control,the unit will blow the cold air
5. Pressing the
“Swing” button,the heater will be swing the blade up and down
PS:For smart operate,customer only press the one start button near about master
button,the heater will working with hot air and Swing function.
3) 24H Timer FUNCTION
1. Press
“ ” button ,set the timer up to 24 hours,keep press “ ” button to increase the
hours from 00--24(00=close,01=1hour,02=2 hours...24=24 hours ect.) and the
“ ” light is
on.
PS:set as
“00” means no set timer ,the “ ” light is off.
4) THERMOSTAT INSTRUCTIONS
1.
To adjust temperature,press the “ ” to set the desired temperature and the
temperature set from 10
℃
to 49
℃
2. When the air temperature drops 2 degree below the set temperature,the heater will start