N'oveen HC3299 WiFi, User Manual

Page: 12 / 23

12
years shall not plug in, regulate and clean the appliance or perform user maintenance.
18. CAUTION
—some parts of this product can become very hot and cause burns.
Particular attention has to be given where children and vulnerable people are present.
INSTALLING THE DEVICE
The heater shall be installed and used according to the safe standard.
To avoid all dangers, follow the safety instructions.
- The installation must be done by the service agent or similarly qualified persons in order to
avoid a hazard.
- Important! Make sure that there are no electric cables or other installations (for example
water pipes) near the drill holes. Make sure that the appliance is securely and vertically
fitted to the wall.
Get two holes on the wall 2 m above the floor and near the corner more 25 mm, be sure to
make the diameter just as same as the expanding pipe.
Fix two screws on the expanding pipe, keep the tips of the screws out for 10mm, and hang
up the machine after the screws are fixed enough
OPERATION INSTRUCTION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
2. Carefully remove the heater from the plastic bag and the carton.
3. Place the heater on a firm level surface ,s
etting the master button to “-”position.plug the
cord set into a AC220-240V electrical outlet
,with “BEE” sounds the “Power”light is on
and the heater will shows the room temperature.
330 mm