Step 1: Connect nSens to Quantadat and start detection
At first startup this message might appear:
Choose YES to reach Sensor Setup directly
Otherwise follow these instructions to detect sensors manually:
Main Display:
IF sensors have been recognized already this message
appear. You can choose Yes to continue and discard
previous sensors.
Quantadat is now searching for connected sensors.
Step 2: Assign nSens to
measuring points
A to D
(Sensor Assign.)
Press «Enter» and «arrow keys» to assign a
serial number to a letter A to D. Each serial
number can only be assigned once.
If just 1 sensor is connected only one letter
is assigned.
Press
for Menu
Press
for Menu
Scroll down
