20
Pan Mode -
This mode allows you to control Track Pan values using the pots. To select this mode,
hold the Shift button and press the Pan pad.
Sends Mode -
This Mode allows you to control Track Sends values using the pots. To select this mode,
hold the Shift button and press the Sends pad. On the first press the pots control to Send A, on the
second press they control Send B.
Note: a mode cannot be assigned to both the pots and the faders at the same time. If a mode is
already mapped to the Faders, the pad will appear red while Shift is held, pressing a pad whilst in this
state will not assign the Pots to that mode.
Faders
(Launchkey 49, 61 and 88 only)
The nine faders provide, linear control over a range of Ableton Live’s mixer parameters. To select one
of these modes hold the Shift button (highlighted in red below) and press the respective Fader button
(highlighted in blue below).
When your Launchkey is connected to Live, the faders default to Volume Mode. In this mode the first
eight faders control Ableton Track Volumes. The ninth Fader always controls the Master Volume no
matter what mode you select. The faders can also be set to control the Send A, Send B levels.
Note: you can’t assign a mode to both the pots and faders at the same time. If a mode is already
mapped to the pots, then the respective Fader button will appear red while Shift is held, pressing a
Fader button whilst in this state will not assign the faders to that mode.
Summary of Contents for Launchkey 25
Page 1: ...1 Version 6 User Guide ...
