Novatel SMART-MR15 Quick Start Manual Download Page 5

LOGGING DATA

An extensive set of logs has been created to capture the data 
your SMART-MR15 receives and processes. These logs can be 
directed to a SMART-MR15 port (COM1 or AUX) and can be 
automatically generated when new or changed data becomes 
available, or at regular intervals. Available logs are listed in the 

OEMV Family Quick Reference Guide, 

found on our Web site at 

www.novatel.com

 through 

Support | Firmware/Software and 

Manuals

.

To log data, use the LOG command. For example, to log the 
pseudorange position to COM 1 every 30 seconds, enter the 
following:

log com1 psrposb ontime 30

When requesting logs, you can request the output data in three 
formats:

ASCII 

Abbreviated ASCII 

Binary 

Abbreviated ASCII is the best format to use when you want to 
work with the receiver directly and review individual log contents 
visually.

Refer to the

 SMART-MR10/15 User Manual (OM-20000130)

 or 

the 

OEMV Family Firmware Reference Manual (OM-20000094) 

for information about the LOG command.

If you prefer, 

Connect

 provides a graphical interface for 

configuring data logging. Select 

Logging Control Window

 from 

the 

Tools

 menu. In the 

Logging Control 

window, you can select 

which logs to capture and choose the ports to which you want 
the data sent. You can also specify a file in which to save the 
data.

When logging data through Connect, close all unused windows 
to maximize COM port throughput and receiver CPU 
performance.

QUESTIONS OR COMMENTS

If you have any questions or comments regarding your   
SMART-MR15 please contact NovAtel using one of these 
methods:

Email:

[email protected]

Web:

www.novatel.com

Phone:  1-800-NOVATEL (U.S. & Canada)

1-800-668-2835
1-403-295-4900 (International)

Fax:

1-403-295-4901

SMART-MR15-specific logs are not included in the Connect 
drop-down menus.

NovAtel, GL1DE and OEMV are registered trademarks of NovAtel Inc.
SMART-MR15 is a trademark of NovAtel Inc.

The 

Bluetooth

®

 

word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by NovAtel Inc. is under license. Other 
trademarks and trade names are those of their respective owners.
Windows is a registered trademark of Microsoft Corporation.
Tyco is a trademark of Tyco Electronics Corporation.
© Copyright 2012 NovAtel Inc. All rights reserved.
Printed in Canada on recycled paper. Recyclable.
Unpublished rights reserved under international copyright 
laws.

Summary of Contents for SMART-MR15






Reviews: