Chapter 2 RELAY7 Installation
RELAY7 User Manual v3
20
l
If installing on a vehicle, mount the SMART7 and RELAY7 on the vehicle roof, ideally close to
the pivot point of the vehicle. The SMART7 and RELAY7 must be mounted with the connector
facing the rear of the vehicle.
Figure 7: SMART7 and RELAY7 Orientation
The SMART7 and RELAY7 must be rigidly secured to the vehicle to avoid errors
caused by vibration and motion.
l
If installing in a stationary location, mount the SMART7 and RELAY7 in a location that has a
clear view of the sky so that each satellite above the horizon can be tracked without obstruc-
tion. For more information, refer to
.
2.4.1 SMART7 and RELAY7 Mounting Hole Locations
The SMART7 and RELAY7 mounting hole locations are shown in the following diagram.