Novatel MiFi 4620L User Manual Download Page 70 | Manualshive

Page: 70 / 79

background image

66

Regulatory Statements

Federal Communications Commission Notice (FCC – United States)

Electronic devices, including computers and wireless modems, generate RF energy incidental to their
intended function and are therefore subject to FCC rules and regulations.

This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a residential environment.

This equipment generates radio frequency energy and is designed for use in accordance with the
manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular
installation. If this equipment causes harmful interference to radio or television reception, which can be
determined by turning the equipment of and on, you are encouraged to try to correct the interference by
one or more of the following measures.

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/television technician for help.

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is
subject to the following two conditions.

•

This device may not cause harmful interference.

•

This device must accept any interference received, including interference that may cause undesired
operation.

WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION
MAY VOID THE WARRANTY. THE MiFi 4620L MODEM IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR
TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR INFORMATION ABOUT
SERVICING YOUR WIRELESS COMMUNICATION DEVICE.

FCC CAUTION

: An

y changes or modiication not expressly approved by the party responsible for compliance

could void the user’s authority to operate this equipment.

MODIFICATIONS:

The FCC requires that you be notiied that any changes or modiications made to this

device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the
equipment.

NOTE:

The Radio Frequency (RF) emitter installed in your modem must not be located or operated in

conjunction with any other antenna or transmitter, unless speciically authorized by Novatel Wireless
Technologies.

«
...
68
69
70
71
72
...
»

Summary of Contents for MiFi 4620L
















































































Reviews:

No comments

Related manuals for MiFi 4620L

Brand: Canon Pages: 4

Brand: STARLINK Pages: 2

SOUNDFLOW i17 +

Brand: WEEPLUG Pages: 22

Barricade SMCWBR14T-G

Brand: SMC Networks Pages: 132

Brand: Abocom Pages: 1

ARS-7235-PSE-AC Series

Brand: ANTAIRA Pages: 24

RangeLAN 802 8520

Brand: Proxim Pages: 90

Brand: NEC Pages: 34

Brand: AMX Pages: 60

Brand: FATEK Pages: 40

Brand: audeeo Pages: 16

Brand: Planet Networking & Communication Pages: 80

Brand: Ublox Pages: 54

MobiiHotspot 4G

Brand: iiNet Pages: 20

Brand: Ubiquiti Pages: 15

Brand: Xentino Pages: 4

DWL-8220AP - AirPremier Wireless Switch Dualband Access...

Brand: D-Link Pages: 37

UniFi UAP--AC--HD

Brand: Ubiquiti Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands