Novatel MiFi 2, User Manual, Page: 101 / 123

100
Modem
•
Phone number (MDN)
— the wireless telephone number for the MiFi 2. This number changes
if the SIM is changed.
•
IMEI
— the International Mobile Equipment Identity (IMEI) for this device. This number does
not change when the SIM is changed.
•
IMSI
— the International Mobile Subscriber Identity (IMSI) is a unique identification
associated with all GSM, UMTS and LTE mobile subscribers. It is stored in the SIM and
changes if the SIM is changed.
•
Wireless Number
— the wireless telephone number for the MiFi 2. This number changes if
the SIM is changed.
•
FW Version
— the current version of firmware installed on the MiFi 2.
•
SIM Status
— indicates current status of the SIM card.
•
ICCID
— the unique identification number assigned to the SIM card. It does not display if
there is no SIM installed, or a SIM error condition exists.
HSPA Status
•
Status
— refers to 4G HSPA and all preceding technologies. The following states are
supported: disabled, not available, available.
•
Technology
— displays current technology in use for the GSM/WCDMA/HSPA network.
•
Network ID
— the name or ID of the GSM/WCDMA/HSPA network.
•
Cell ID
— identifies the cell tower currently in use.
•
RSSI
— displays the RSSI measure of signal strength in decibels. This is always a negative
number, and higher absolute values indicate a stronger signal.
•
Roaming
— indicates if the current connection is a roaming connection.
LTE Status
•
Status
— displays current LTE network status. Possible status values are disabled, not
available, or available.
•
Signal Strength
— indicates the strength of the LTE signal. This is always a negative number,
and higher absolute values indicate a stronger signal.
•
SINR
— indicates the signal quality. Higher numbers indicate a better signal.
•
Roaming
— indicates if the current connection is a roaming connection.