manualshive.com logo in svg

Novatech Bitronics PowerPlex II, User Manual, Page: 23 / 136

Share
Download
Novatech Bitronics PowerPlex II User Manual Download Page 23

 

23 

ML0044B   December 1, 2017                                                            Copyright 2016 Bitronics, LLC 

 

 

 

Figure 2 - Wiring Terminal Assignments for Input and Output Options 

 
 

1.5  Standards and Certifications 

 

1.5.1  Revenue 

 
The PowerPlex II exceeds the accuracy requirements of ANSI C12.20 and IEC 62053-
22.  
 

Type 

Nominal Current

Certification 

MTWDN7C 5A 

 

ANSI C12.20, 0.2CA 
IEC 62053-22, 0,2S 
IEC 62053-23, 0,2S (Reactive)

 
The PowerPlex II was tested for compliance with the accuracy portions of the 
standards only. The form factor of the PowerPlex II differs from the physical 
construction of revenue meters specified by the ANSI/IEC standards and no attempt 
has been made to comply with the standards in whole.  Contact customer service for 
more information. 
 

 

 
 

Summary of Contents for Bitronics PowerPlex II









































































































































Reviews:

No comments