NOVATECH ApS - Skudehavnsvej 30 - DK 9000 Aalborg. P.O.Box 540
Tel. +45 98 16 50 09 Fax +45 98 16 80 97 [email protected]
26
7.2.
Grease points
Following parts should be greased frequently (
):
a.
Axle bolts
b.
Rocker arm bolts
c.
Wheel hubs
Fig. 8 Greasing points in Roll Trailer: 1) Rocker arm bolts; 2) Wheel hubs; 3) Axles bolts;
Table 3. Grease points
Grease Points
Item
Greasing interval
Grease nipples in
wheels
8
6 months – top the grease off with standard
pressure of grease pump (300-400 bar)
36 months recommended – disassemble the
hub, clean bearings, check the bearings
technical condition (change if necessary),
remove old grease from the hub, change the
seal, apply new grease
Grease nipples in axle
bolts
4
6 months – top the grease off with standard
pressure of grease pump (300-400 bar)
Grease nipples in
rocker arm bolts
2
6 months - top the grease off with standard
pressure of grease pump (300-400 bar) until
visible on both sides of the tube
Lubricant: Standard multipurpose grease. Viscosity class NLGI 2 (e.g. Avia Lithoplex EP2).
NOTICE
In case of heavy duty use, please shorten the greasing intervals;
Frequent lubrication extends the service life of bearings;
