16 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Diver 1
These settings pages are the same for Diver 2, 3 and 4. But each Diver has its own settings which can be set.
The diver settings has 7 different pages where you scroll through using the rotary switch. The last page returns to Main
settings.
- MAIN SETTINGS
Diver 1
>
----Diver 1----
Can hear
----Diver 1----
2/4 wire
----Diver 1----
Type comms
----Diver 1----
Mic gain
----Diver 1----
Head gain
----Diver 1----
Show Depth
----Diver 1----
To main settings
----Diver 1----
VOX
Can Hear
----Diver 1----
Can hear
Can hear
D2 T1 H1 H2 AUX
At each diver you can select which audio source the diver will hear on his earphone.
See Chapter
for a full explanation of the can hear function.
2/4 wire
----Diver 1----
2/4 wire
2/4 wire
Four wire
2/4 wire
Two wire
Select here the type of wired comms you use. When you use a 2 wire comms system,
you need to select the Two wire mode, else the diver will not hear the Tender.
When you have a 4 wire comms system, you need to select Four wire mode, else the
diver will also not hear the Tender.
Type of comms
----Diver 1----
Type comms
Type comms
Novasub
Type comms
Kirby
Type comms
Interspiro
Type comms
OTS
Type comms
Custom
Here you can select which type of communication
is used on the helmet or FFM. Each system has
different gain settings for optimum use. We made a
pre-selected gain matching each brand of
communication unit. Each predefined gain setting
can be adjusted in the menu at the diver settings
and will be stored in the memory. When you use
the reset settings it will jump back to the factory
settings. Predefined settings are based on 4 wire
comms.
This setting does not change the wire layout/wiring
diagram!
Novasub
Novasub brand comms set for Kirby helmets
Kirby
Kirby Morgan standard comms set for Kirby helmets
Interspiro
Interspiro comms set for Divator FFM
OTS
OTS comms set for FFM
Custom
Custom or other brand of comms set used in helmet or FFM
