14 of 33
xDR-DSP
– Diver Intercom Manual
Build 39 Date: 30-08-2021
Main settings
-- MAIN MENU ---
Main Settings >
This enters the Main setting menu, which will be further explained in chapter 9.4
It the password protection is activated you will need to enter the password by using the rotary
encoder, see chapter 9.4.99.4
Display settings
-- MAIN MENU ---
Display Setting >
Contrast
XX
{Value 0-64}
Display Settings
Contrast
Display Settings
Backlight
Backlight
XX
{Value 0-25}
Display Settings
To main menu
In this page you can adjust the contrast and backlight of the display.
The display is a daylight display, that means the more daylight you
have, the better you will see the text. You only need backlight in
darker surroundings. By default the backlight display is set low.
Startup Function
-- MAIN MENU ---
Startup Function
Startup Function
Vol. Tender
Startup Function
Vol.Ext.Speaker
Startup Function
Comms Mode
Here you select what you want to control with the rotary switch in the
standard display when you are not in the Main Menu.
•
Vol. Ext. Speaker
This shows in the main display the volume of the external
speaker, increase and decrease the volume with the rotary
switch
•
Vol. Tender
This shows in the main display the volume of the Tender,
which is the internal speaker & headset. Increase and
decrease the volume with the rotary switch
•
Comms Mode
This shows in the main display the comms mode you
selected of Diver1. You can switch quickly to another type of
comms. This can be handy when you use different type of
comms systems on the helmet/FFM in your team. Note that
this feature only changes the gains to accommodate for a
different comms system and is does not change the wire
layout/wiring diagram.
