MX40 Pro LED Display Controller User Manual
www.novastar.tech
4
When the four optical ports are used for output simultaneously, they support copy
mode:
OPT 1 copies and outputs the data on Ethernet ports 1
–10.
OPT 2 copies and outputs the data on Ethernet ports 11
–20.
OPT 3 is the copy channel of OPT 1 or Ethernet ports 1-10.
OPT 4 is the copy channel of OPT 2 or Ethernet ports 11-20.
HDMI 2.0 -1
LOOP
1
An HDMI loop output connector
HDMI 2.0 -2
LOOP
1
An HDMI loop output connector
12G-SDI LOOP
1
An SDI loop output connector
SPDIF OUT
1
A digital audio output connector (Reserved)
Control (CONTROL area)
Connector
Qty
Description
ETHERNET
2
2x Ethernet control ports
They can be connected to the control PC or used for device cascading control.
GENLOCK
1
A pair of Genlock signal connectors. Support Bi-Level, Tri-Level and Black burst.
IN: Accept the sync signal.
LOOP: Loop the sync signal.
For standard Genlock signal generators, up to 10 MX40 Pro devices can be
cascaded.
AUX
1
An auxiliary connector that can be connected to the central control device (RS232)
or 3D synchronizer (Reserved)
Power
100-240V~,
50/60Hz, 2A
1
An AC power input connector and switch
XI'AN
NOVASTAR
TECH
CO.,
LTD.
