Independent Controller MCRL R5
User Manual
5 Menu Operations
www.novastar.tech
13
5.6.5 Redundancy
Set the current device as the primary or backup device.
5.6.6 Preset Template
Save configuration information, rotation parameters, and user settings information as
templates. Users can add 10 templates at most.
5.6.7 Hot Backup for Input Source
Set backup source for the current input source. The backup source should be other
types of input source supported by the device.
5.6.8 Factory Reset
Reset the current device to factory settings.
5.6.9 Go Homepage (s)
The current page stays for how many seconds before going homepage when there is
no actions.
5.6.10 Greyscale Adjustment
Adjust greyscale among the range from 4 to 15 for the LED display screen.
5.6.11 Hardware Version
View the hardware version of current device. In case of new version release, access
NovaLCT through PC to upgrade the hardware version.
5.7 Communication Settings
Set the communication mode and network parameters.
Two communication modes are provided:
USB Preferred
and
LAN Preferred
.
When the USB and Ethernet ports are connected at the same time, the system will
use the communication mode set by the user.
XI'AN
NOVASTAR
TECH
CO.,
LTD.
