HS-1RS User Guide
Page 40
Enable
* Disable
RFID Suffix Block String
Use the following command in combination with ASCII or hex characters to set the
specific RFID Suffix string. See
Appendix D
for ASCII/hex conversion help.
Note:
Hex characters must be preceded by
\x
to be recognized as hex instead of
ASCII and it’s not possible to interject a Carriage Return in the middle of the block string.
For instance, it’s possible to program a Suffix that starts with 123 (regular ASCII text),
then a Tab symbol (as hex 09) and then ABC (ASCII characters again), send the
following:
SUFRBLK 123\x09ABC
Please contact JADAK if you need further help. The default RFID Suffix Block string is a
Carriage Return (
hex ‘0D’
).
*
RFID Suffix Block \x0D
RFID Presentation Time Out
When you place the HS-1RS in a presentation cradle, it will automatically switch to Barcode
Presentation mode. By pressing the trigger button, you can toggle between Barcode and RFID
Presentation mode. By default, this is an infinite duration, but you can also have the HS-1RS
switch back to barcode presentation mode from RFID mode after a specific time.
Use the command
PSTTIME x
(where ‘x’ is a value between 0 and 3600000)
, to set the time
between 0 (no time out) and 3600000 (=1 hour) in steps of 1ms, or by building a menu command
barcode. Please contact JADAK if assistance is needed. Default time = 0 / Infinite Time Out.
Setting examples:
