UNPACKING
PAGE
|
15
Unpacking the i401 laser
To unpack the i401 laser, refer to Figure 1-1 and perform the following steps. The numbered items in Fig-
ure 1-1 correspond to the step numbers in the following procedure.
Figure 1-1 Unpacking the laser.
1
Carefully cut the shipping straps wrapped around the shipping container.
2
Remove the upper lid and set it aside.
3
Carefully lift or hoist the sling containing the i401 laser out of the container and place it on a solid
surface. To prevent injury to personnel or damage to the laser, always use at least two people to
lift and move the sling.
4
Lift or hoist the i401 laser out of the container using the three lifting handles. To prevent injury to
personnel or damage to the laser, always use at least two people to handle the i401 laser.
5
After removing the laser, pull out all accessory items and paperwork packaged behind the laser in
the shipping container’s accessory compartment.
6
Save the shipping container and sling. Use these specialized packaging materials when shipping
the laser to another location.
Important Note: Do not lift or support the i401 laser using the cooling fittings. Lift the laser
by the lifting handles or base plate only
