12
FIBER_TIGER_manual, 2021-11-29
3.3.
Controls and indicators
3. Overview
1
2
Figure 3.3.: Position of interfaces at the bottom
Legend to figure 3.3
No. Marking / function
See section On page
1 Protective window andlaser aperture 6.2
2 Purge gas outlet
3.3. Controls and indicators
The scan head has no physical controls. Operate the scan head as described in chapter 5
on page 34.
The LEDs at the ARN interface are the only direct indicators. They show rudimentary
information about the data link between the product and the ARGES system controller;
see figure 3.4 on page 12.
green
yellow
Figure 3.4.: LEDs at the ARN interface and their meaning:
green = link, yellow = active
