Novanta 32-1 Laser, User Manual

Page: 5 / 58

IMPORTANT INFORMATION PAGE | 5
Important Information
For your protection, carefully read these instructions before installing and operating the scan head.
Retain these instructions for future reference.
Novanta reserves the right to update this user manual at any time without prior notification.
If product ownership changes, this manual should accompany the product.
Safety Symbols
DANGER
: Indicates a hazardous situation which, if not avoided, will result in serious injury or death.
Its use should be limited to the most extreme situations.
WARNING:
Indicates a hazardous situation which, if not avoided, could result in serious injury or death.
CAUTION
: Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury .
Important Note: Indicates information considered important but not directly hazard related (e.g.,
security, hygiene, or equipment or property damage) .
Safety Labels
DANGER :
Laser radiation can cause severe retinal and corneal burns, burns on the skin, and may pose
a fire risk. To avoid injury and reduce risk of fire, please follow the control measures and safety
guidelines provided by the laser’s manufacturer, and those established by your Laser Safety Officer
(LSO), Radiation Safety Officer (RSO), or safety department of your business or institution.
ESD Warning
MOVIA scan heads are electrostatic discharge-sensitive devices (ESD). The equipment should
remain sealed until the user is located at a proper static control station; improper handling could
cause damage to these electronics. A proper static control station should include:
A soft grounded conductive tabletop or grounded conductive mat on the tabletop.
A grounded wrist strap with the appropriate (1 M Ω ) series resistor connected to the tabletop mat
and ground.
An adequate earth ground connection, such as a water pipe or AC ground.
Conductive bags, trays, totes, racks, or other storage.
Properly grounded power tools.
Personnel handling ESD items should wear ESD protective garments and ground straps.
Important: Equipment returned to the factory must be shipped in anti-static packaging.