NovaLynx Corporation________________________________________________________________________________
200-WS-23-DP
Page 5
July 2022
3
SPECIFICATIONS
4
INSTALLATION
Please refer to the 200-WS-02FA Wind Speed and Direction Sensor user manual for information on
installation and maintenance of the anemometer. Pay particular attention to the location of the sensor
and align the wind vane to North for best results. Route the cable indoors to the location where the
display unit will be installed.
Locate the display unit indoors near a power source. The unit may be
fastened to a wall at a convenient height for easy viewing. Remove the clear
front cover to access the mounting hole locations at the corners of the
enclosure (Appendix A).
Mounting screws are not included; the installer will need to supply screws
and wall anchors suitable for the wall material.
Display meters
3 ½ digits, 1" (24.9 mm) 7 segment high contrast LCD
Wind Speed Transmitter Output
4 mA = 0 m/s, 20 mA = 50 m/s standard (0-100 MPH scale optional)
Wind Direction Transmitter Output
4 mA = 0 degrees, 20 mA = 360 degrees
Power supply
AC Adapter, 100-240 VAC input / 24 VDC output
Operating temperature range
-10 to +50°C
Storage temperature range
-40 to +75°C
Dimensions
4.75" x 7.875" x 3.00" (121 x 200 x 76 mm)
Measurement range
0-112 mph (0-50 m/s)
Speed Constant
1.25 mph = 1 Hz (0.5588 m/s = 1 Hz)
Transducer type
Reed switch
Speed Threshold
0.8 mph (0.4 m/s)
Accuracy
1 mph or ± 3%
Range
0-360 degrees azimuth
Transducer type
Potentiometer, 20k ohms, conductive plastic
Potentiomenter gap
5 degrees
Azimuth accuracy
± 3 degrees
Threshold
1.2 mph (0.5 m/s)
Bearings
Bushing
Anemometer mount
1.07" dia. (27 mm)
Anemometer cable
5 conductor, 24 AWG, shielded, 40' length standard
Display Unit / Transmitter Specifications
Wind Speed Sensor
Wind Direction Sensor
General
Enclosure
Clear cover
1/4 turn
