Novakon Systems NM-200 Pro Series, Operator'S Manual

Page: 10 / 47

component, a Return Merchandise Authorization (RMA) number must be assigned in order for
us to accept the return shipments.
No warranty registration is required. Please provide your invoice as proof of purchase. In the
event that it is not provided, the date at the time of warranty will be determined by the
purchase date and will be used to determine the warranty period.
2.2 CAUTION
•
Do not attempt to operate or turn on the machine until you have read and understood
the manuals supplied with the machine.
•
Do not allow chips to accumulate in the work envelope.
•
Warm up the spindle and axis motion before running the machine in automatic mode.
•
Do not operate the keyboard or operation panel switches when wearing gloves.
•
Do not disconnect the main power cable without switching off the CNC and PC
connections.
•
Do not remove any safety covers while the machine is in automatic operation mode.
•
Stop all machine operations before cleaning the machine or any peripheral equipment.
After a job has been completed, set up each part of the machine so that it is ready to be
used for the next series of operations.
•
Make sure that the tool length to diameter ratio is proper to minimize vibration due to
excessive overhang conditions.
•
Make sure the drawbar and the tool holders are tightened to the proper cutting
conditions before actual cutting operations.
•
Do not use compressed air to clean the machine.