background image

NOVAK ELECTRONICS • PROFILE SOFTWARE

22

SERVICE RETURN

SHEET

IF YOUR DATA LINK IS NOT OPERATING PROPERLY, COMPLETE ALL INFORMATION ON
THIS SHEET (OR A COPY), AND RETURN IT WITH YOUR DATA LINK, CABLE, & ADAPTOR.

4

RETURN SHIPPING

Please select a UPS shipping method**:

 GROUND     3-DAY     2-DAY     NEXT DAY

**If method is not selected, unit will be shipped UPS Ground.

Units Serviced Under Warranty:

 

 Units shipped back

to one of the 48 continental U.S. states will be
shipped UPS Ground at no charge.

 

However, if 3-

Day, 2-Day, or Next Day Air is indicated, or if the
warranty repair is being sent outside of the 48
continental states, current UPS rates will be charged.

All International repairs are shipped Air-Mail.

Units Not Covered Under Warranty: 

Current UPS

shipping fees will be added to the service cost.

5

PAYMENT INFORMATION

Select payment method

.

 

®

     

MasterCard

®

 

COD Cash  

 COD Check

If COD is indicated, UPS COD fees will be added to shipping

charges. If a payment method is not indicated (or if charge card/
check is not approved) unit will be shipped back COD Cash.

PAYMENT BY CREDIT CARD:

Credit Card# ___________________________________

Card Holder's Name ____________________________

Exp. Date __________ Signature __________________

PAYMENT BY COD CHECK 

(info. from your check)

:

Name ______________________ Phone ____________

Address ____________________ City ______________

State ____ Zip ________ D.L. # ___________________

6

AUTHORIZATION TO SERVICE UNIT

I authorize Novak Electronics, Inc. to service the
enclosed DataLink as I have indicated.

Signature ____________________

Date ________

SHIP DATA LINK TO:

NOVAK ELECTRONICS, INC.

  18910 Teller Avenue, Irvine, CA 92612  USA • Attn: Service Dept.

NOTE: Please read the Trouble-Shooting Guide and all instructions before sending in your
DataLink for service. If the unit operates normally when received, a $15.00 inspection fee will
be charged.

CUSTOMER'S RETURN SHIPPING ADDRESS

NAME

DAYTIME PHONE

DATE

ADDRESS 

(UPS will not deliver to a PO Box)

CITY

STATE

ZIP CODE

COMPANY 

(If applicable)

 Residential

 Commercial

(        )

1

INSTALLATION/MODEL

PROFILE SOFTWARE  Version # ___ Serial # _______

COMPUTER 

(Mnf/Model) ______________________

OPERATING SYSTEM

 Windows 95

®

 MS

®

 DOS

 Windows 3.1

®

________

2

DESCRIPTION OF PROBLEM

Has this unit ever worked properly?

 Yes

 No

Has unit ever been sent in for service?

 Yes*

 No

*Attach a copy of the previous service invoice to this sheet.

3

CLAIMING WARRANTY?

 

YES

An itemized sales receipt or previous
service invoice dated within the last
90 days must be stapled to this sheet.

Please read the Warranty Statement. If
no provisions have been voided, the
unit will be replaced/repaired at no
charge. 

Complete STEPS 4-6.

Purchase Date ______________________

Purchased From ____________________

Dealer's PH#

 (          ) ________________

 

NO

Unit will be replaced/repaired for a
$20 fee plus shipping and handling.

Complete STEPS 4-6.

Pricing and policy information subject to change without notice.

Summary of Contents for ESC PROFILE SOFTWARE





























Reviews: