NOVACARE 960800, Instructions For Use Manual

Page: 15 / 40

15
In order to start the lifting process, press the „Up arrow“ button (1)
on the manual controller. To start the lowering process, press the
„Down arrow“ button
(2) .
The CBJC control box has either buttons or recessed buttons. The
lifting arm can be raised or lowered by pressing the recessed buttons
with the tip of a pen. This is a permissible method of raising/
lowering the hoist if a manual controller is not connected. The
lifting/lowering „buttons“ function in the same way as the normal
manual controller buttons (no extended functions are available with
a low battery).
To lower the hoist mechanically in an emergency, turn the
emergency lowering lever clockwise
(4) . The hoist will lower
automatically.
Please ensure that the red EMERGENCY STOP button is deactivated
during use
(5) . Activate the red EMERGENCY STOP button only in an
emergency, if the hoist has to be switched off immediately (e.g. if
the hoist is faulty or has toppled over).
If the hoist is not used for an extended period (e.g. during storage or
transport), the red EMERGENCY STOP button can also be activated. To
activate the red EMERGENCY STOP button, press the button until it locks
(6)
.
To deactivate the EMERGENCY STOP button, turn clockwise – this will
release the button
(7) . The hoist can then be used again. Note that the
cause must be located.
CBJC Version
4
5
6
7
2
1