Reference Manual
Page 2
Reference Manual
Page 11
DXP Series Switching Power Amplifier
DXP Series Switching Power Amplifier
The information furnished in this manual does not include all of the details of design and engineering of this
particular product; not does it cover every possible application or situation concerning its usage, which may
occur during the installation, operation or maintenance of said NOVA product.
Service
This unit has very sophisticated circuitry and should only be serviced by a fully trained
technician.
This is why each unit bears the following label:
To prevent electric shock, do not remove covers. No user serviceable parts inside. Refer
servicing to a qualified technician.
Worldwide Service
Service may be obtained from your local authorized service center. To obtain service, simply
present your sales receipt as proof of purchase along with the defective unit to an authorized
service center. They will handle the necessary paperwork and repair. Remember to transport
your unit in the original factory packaging.
1.
When sending a NOVA product to the authorized service center for service, be sure to fill out
the service information form that is enclosed at the end of this manual and include it inside
your unit's shipping pack. Do not send the service information form separately.
2. To ensure the safe transportation of your unit to the authorized service center, ship it in an
original factory-packing container.
3.
Do not
ship the unit in any kind of rack. Ignoring this warning may result in extensive damage
to the unit and the equipment rack. Accessories are not needed. Do not send the instruction
manual, cables and any other hardware.
The DXP Series amplifier has an automatic power factor correction system for a
perfect main network interface. The amplifier is a resistive load for the main network,
minimizing the reactive power and the harmonic distortion on the current. The system allows
performance to be maintained even in circumstances of varying the mains voltage.
IMPORTANT
THE PRODUCT REQUIRES
CLASS 2 OUTPUT WIRING.
TO PREVENT ELECTRIC SHOCK, DO NOT
REMOVE TOP OR BOTTOM COVERS. NO
USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL. DISCONNECT POWER CORD
BEFORE REMOVING REAR PANEL COVER
TO ACCESS GAIN SWITCH.
Shock Hazard - Do Not Enter
Choc Hasard - N*entrent
Schocke Hazard - Test Nicht
Betrete
Urto Hazard - Do Non Entrano
WARNING
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR MOISTURE!
Magnetic Field
CAUTION: Do not locate sensitive high-gain equipment such as preamplifiers or tape
decks directly above or below this unit. Because this amplifier has a high power density, it
has a strong magnetic field which can induce hum into unshielded devices that are located
nearby. This field is strongest just above and below the unit. If an equipment rack is used,
we recommend locating the amplifier(s) at the bottom of the rack and the preamplifier or
other sensitive equipment at the top.
The lightning bolt triangle is
used alert the user to the
risk of electric shock.
The exclamation point triangle is used
to alert the user to important operating
and/or maintenance instructions.
Printed on
recycled paper.
CAUTION
Summary of Contents for DXP6000
Page 1: ...USER S MANUAL P R O F E S S I O N A L A U D I O...
Page 2: ......