
EN
G
LI
SH
12
10. NOVA ELECTRONICS strongly recommended that the installation of
this product is only made by professional qualified installers (or
specialized firms) are able to ensure correct installation and certify it
according to local regulations. The entire audio system must comply
with the current laws and regulations relating to electrical installations.
11. Hearing Loss
Exposure to high sound levels can cause permanent hearing loss.
The level of acoustic pressure for the hearing loss is different from
person to person and depends on the duration of exposure. To
prevent potentially dangerous exposure to high levels of pressure
scustica, it is necessary that everyone is exposed to these levels
should use adequate protection when operating a transducer
capable of producing high sound levels you need to use plugs or ear
defenders.
12. To prevent inductive causing hum, noise and the proper functioning
of the system, the audio cable should not be installed close to
electromagnetic fields.
13. REB-25 place away from sources of heat.
14. Do not use solvents, alcohol, gasoline or other volatile substances to
clean the exterior
CAUTION
Any use of REB-25 outside the guidelines in this user
manual (electrical modifications, disassembly, links to
amplifiers from other manufacturers and / or with powers
that do not conform to our product or equipment operating
at mains voltage) could irreparably damage the speaker.
Malfunctions or failures caused precisely by use not
recommended, cause decline of the warranty conditions of
our product. Nova Electronics will not be responsible in any
way for damage to property and / or injury due to
negligence and incorrect use not covered in this document.
EN
G
LI
SH
13
NOVA ELECTRONICS THANK YOU FOR THE PURCHASE OF THIS
PRODUCT, MADE IN ITALY IN ORDER TO ENSURE RELIABILITY AND
HIGH PERFORMANCE
REB-25 is a loudspeaker that uses a technology in mechanical
transmission to generate the sound. Its principle of operation is
effective if it is firmly attached to solid surfaces and / or walls of
thicknesses and weights appropriate.
The larger the surface, the lower the resonant frequency of REB-25
resulting in an increase of the frequency response to 20 Hz. If used
without contact surfaces, REB-25, will not play properly emitting
frequencies only medium-high .
REB-25 is designed to meet those installations where it is necessary
to have public address hidden and where it is not possible to make
holes for the application of marine loudspeakers.
EXAMPLES OF PRACTICAL APPLICATIONS:
Box Shower facilities with plasterboard.
Turkish Baths, Roman Baths (tepidarium) with fiberglass
walls and mosaic.
Saunas with wooden walls.
Imba.
Relaxation Areas and / or Living with plasterboard ceilings.
Walls and / or ceilings made no masonry.
The small size of REB-25 allow the use in structures with limited sizes
and / or thicknesses.
DESCRIPTION
Summary of Contents for REB-25
Page 10: ......