![Nouveau 361424 Manual Download Page 4](http://html.mh-extra.com/html/nouveau/361424/361424_manual_1710066004.webp)
3
TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT USE THIS
FAN WITH ANY SOLID-STATE SPEED CONTROL DEVICE.
UNPLUG OR DISCONNECT THIS FAN FROM THE POWER SUPPLY BEFORE
SERVICING.
Assembly Instructions:
9.
10.
1 1.
12.
13.
14.
15.
16.
17.
18.
19.
Do not operate fan with a damaged cord, plug or after the fan suffered
malfunctions or has been dropped or damaged in any manner.
The use of attachment not recommended by manufacturer may be
hazardous.
Do not use outdoors.
Do not let cord hang over the edge of a table or counter, or let it touch any
hot surfaces.
To disconnect, grip plug and pull from wall outlet, never yank cord.
Do not operate without fan lattice properly in place.
Always use on a dry level surface.
This appliance is not intended for use by children or other persons without
assistance or supervision if their physical, sensory or mental capabilities
prevent them from using it safely.
Children should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or similarly qualified person in order to avoid a hazard.
DO NOT attempt to defect this safety feature.
1.
2.
3.
4.
Unscrew the L-shaped screw and remove it and the clamping washer from
the end of the base tube.
Loosen the height adjustment ring at the top of the base tube and pull out
the extension pole to the desired height, or all the way to the top for
maximum height (you may have to push it up from the bottom if it is tight or
stuck). At the desired height, turn the height adjustment ring clockwise to
tighten securely.
Insert the base tube into the hole on the base, turn over the base and affix
the tube using the L-shaped screw and the clamping washer. Tighten the
screw firmly but do not overtighten.
Set the base on a level, dry surface.