Notsi, Ltd., Bulgaria, 9027 Varna, Troleyna 12 street
Ph.: 00359 899 822010; Fax: 00359 52 507227
Web:
www.deltapulse.eu
; E-mail:
Mole LRL 3000D operating manual
11
LOCALISATION
If the locator detects the desired
type of metal, the baguettes will
cross. Place there a rod, a stone, a
piece of
stick, a bunch of grass or
other non-metallic objects. Go 3-4
meters back and 10-15 meters to
the right of the locator and cross the
line of resonance again. If the
baguettes cross again and again,
put 2, 3, 4 rods and continue until
the time when the baguettes do not
cross after crossing the marked line
(
Fig
.
1
). After that, go back along the
marked line. Stand with your back to
the locator (
Fig. 4
) and go with the
baguettes along the line. Now, the
baguettes will cross when you reach
the electronic metal object. If the
searched object is close to the
locator, that's good, but if the buried metal is not close, then you have to do
something else. Once you have found the line of the electronic object and
marked 3-4 points with rods, turn off the device and move it 90 degrees to the
established line (see
Fig. 3
). Start a new measurement after switching on the
device and carrying out all the necessary operations carried out in the first
measurement. There should be an interval of 15 to 20 minutes from one
