Notifier NFS-320 Installation Manual Download Page 8 | Manualshive

Page: 8 / 64

background image

8

NFS-320/E/C Installation Manual —

P/N 52745:M2 7/1/14

About This Manual

UL 864 Compliance

1.2 UL 864 Compliance

1.2.1 Products Subject to AHJ Approval

This product has been certified to comply with the requirements in the Standard for Control Units
and Accessories for Fire Alarm Systems, UL 864 9th Edition.

The following products have not received UL 864 9th Edition certification and may only be used in
retrofit applications. Operation of the NFS-320/E/C with products not tested for UL 864 9th Edition
has not been evaluated and may not comply with NFPA 72 and/or the latest edition of UL 864.
These applications will require the approval of the local Authority Having Jurisdiction (AHJ).

•

For a complete list of all peripherals that can be used with this fire alarm control panel (FACP),
and which of those peripherals have not received UL 864, 9th Edition certification and may
only be used in retrofit applications, see Section 2.3, “Compatible Equipment”, on page 16.

1.3 Related Documents

Table 1.1 below provides a list of documents referenced in this manual, as well as documents for
selected other compatible devices. The document series chart (DOC-NOT) provides the current
document revision. A copy of this document is included in every shipment.

Compatible Conventional Devices (Non-addressable)

Document Number

Device Compatibility Document

15378

Fire Alarm Control Panel (FACP) and Main Power Supply Installation

Document Number

NFS-320/E/C Installation, Operations, and Programming Manuals
NFS-320C Canadian Applications Addendum

52745, 52746, 52747

52745CDN

SLC Wiring Manual

51253

Note: For individual SLC Devices, refer to the

SLC Wiring Manual

Off-line Programming Utility

Document Number

VeriFire® Tools CD help file

VERIFIRE-TCD

Power Supplies, Auxiliary Power Supplies & Battery Chargers

Document Number

ACPS-2406 Installation Manual

51304

ACPS-610 Instruction Manual

53018

APS-6R Instruction Manual

50702

APS2-6R Instruction Manual

53232

CHG-120 Battery Charger Manual

50641

FCPS-24S6/FCPS-24S8 Field Charger/Power Supply Manual

51977

Networking

Document Number

High-Speed Network Communication Module

54014

High-Speed Noti•Fire•Net Instruction Manual

54013

Noti•Fire•Net Manual, Network Version 5.0 & Higher

51584

ONYXWorks™ Workstation Hardware & Software Application: Installation and Operation Manual

52342

ONYXWorks™ NFN Gateway (PC Platform) Installation & Operation Manual

52307

Table 1.1 Reference Documentation (1 of 2)

«
...
6
7
8
9
10
...
»

Summary of Contents for NFS-320

































































Reviews:

No comments

Related manuals for NFS-320

Brand: Jafar Pages: 10

Brand: Jafar Pages: 8

Brand: B&G Pages: 2

Brand: B&K Pages: 9

Brand: D+H Pages: 36

Brand: D-Box Pages: 4

Brand: D+H Pages: 36

Brand: GCE Pages: 24

Brand: GEA Pages: 13

Brand: Frico Pages: 12

Brand: Comparato Pages: 20

Brand: Mosa Pages: 28

Brand: NXP Semiconductors Pages: 39

Brand: FUTABA Pages: 16

SCENE MASTER - V1.0

Brand: JBSYSTEMS Light Pages: 24

Brand: CALEFFI Pages: 14

Brand: EasyCare Pages: 26

NetLinx Integrated Controller NI-3100

Brand: AMX Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands