Page 1 of 3
Thank you very much for choosing a Northern Industrials Tools product! For future reference, please
complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor strongly recommends this
machine is not modified and/or used for any application other than that for which it was designed. If you
have any questions relative to a particular application, DO NOT use the machine until you have first
contacted the distributor to determine if it can or should be performed on the product.
For technical questions and replacement parts, please call 1-800-222-5381.
GENERAL DESCRIPTION
Custom wood crib holds your firewood in a neat stack and helps organize your woodpile! Make it any
length you like with two 2 x 4s (not included). Moisture resistant baked-on finish. Rack helps keep wood
dry and termite-free. Rack ends are 13in. W x 44in.H.
GENERAL SAFETY REGULATIONS
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious bodily injury or death, and/or property damage.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be understood
by the operator that common sense and caution are factors that cannot be built into this product, but
must be supplied by the operator.
•
Keep the work area clean and dry.
Damp or wet work areas can result in injury.
•
Keep children away from work area.
Do not allow children to handle this product.
•
Always wear ANSI-approved safety glasses and heavy-duty work gloves during
assembly and use.
Do not wear loose clothing or jewelry which can get caught in moving
parts.
•
Store idle equipment.
When not in use, tools and equipment should be stored in a dry location
to inhibit rust. Always lock up tools and equipment, and keep out of reach of children.
•
Use the right tool for the job.
Do not attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It
will do the job better and more safely at the capacity for which it was intended. Do not modify
this equipment, and do not use this equipment for a purpose for which it was not intended.
•
Check for damaged parts.
Before using this product, carefully check that it will operate
properly and perform its intended function. Check for damaged parts and any other conditions
that may affect the operation of this product. Replace damaged or worn parts immediately.
•
Do not overreach.
Keep proper footing and balance at all times to prevent tripping, falling,
back injury, etc.
•
DO NOT use the equipment when tired or under the influence of drugs, alcohol, or
medication.
A moment of inattention while operating this equipment may result in serious
personal injury.
•
Industrial applications must follow OSHA requirements.
