12
NOTE:
It is best to mount the solenoid assembly in a location that minimizes the distance from the nitrous regulator to the fuel
pressure regulator.
2.6 Solenoid and Regulator Mounting—Kit Number 05176TBNOS only
Use the following procedure to install the nitrous solenoids.
CAUTION:
Do not overtighten the vise in the following procedure, or the solenoid will be damaged.
NOTE:
Apply Teflon-based paste to all pipe thread fittings before assembling the solenoids and regulators.
1. Clamp one nitrous solenoid (9) base in a bench vise.
2. Thread one side of the solenoid TEE (10) into the solenoid outlet port. The 1/8” NPT port should be facing outward, as
shown in Figure 5.
3. Thread the other end of the solenoid TEE into the inlet port of the second nitrous solenoid. Rotate the second solenoid, so
it is parallel to the first.
4. Line up the bolt mounting holes on both solenoids with the holes in the solenoid bracket (11).
5. Install the nitrous filter fitting (12) into the first nitrous solenoid inlet port.
6. Install the 1/8” NPT nipple (13) into the nitrous pressure regulator (14) inlet port.
7. Loosely thread the nitrous pressure regulator/nipple assembly into the solenoid TEE open port. If the regulator interferes
with the solenoid coils, the coils may be temporarily removed.
8. Thread the 1/8” NPT-to-3/16” hose barb fitting (15) into the regulator.
9. Attach the solenoid mounting bracket to the nitrous solenoids.
10. Thread the 1/8” NPT - 3AN male fitting (16) into the second nitrous solenoid outlet port.
11. Remove the assembly from the bench vise.
12. Ensure that the 2 ft. 3AN x 1/8” NPT nitrous feed line (16) provided will reach the nitrous nozzle from the passenger’s side
cowl mounting shown in Figure 5.
13. Attach the nitrous solenoid/bracket using the 1/4”-20 screw, nylon lock nut, and 1/4” washers, as shown in Figure 5.
NOTE:
It is best to mount the solenoid assembly in a location that minimizes the distance from the nitrous regulator to the fuel
pressure regulator.
Figure 5 Solenoid and Regulator Mounting—Kit Number 05176TBNOS only
