Norwood Kwik-Pit 26 Series, Operator'S Manual

Page: 79 / 133

5 - MAINTENANCE
5-1
5.0 MAINTENANCE
General Maintenance Safety
1. Review the Operator’s Manual and all safety items before
working with, maintaining or operating the Kwik-Pit.
2.
When machine is connected to a towing vehicle, park on
a level surface, engage park brake, place transmission
in PARK, shut off engine, remove key, and wait for all
moving parts to stop before leaving vehicle cab.
If machine is detached from a towing vehicle and in the
raised position, block wheels and use safety stands to
prevent movement.
3. Do not attempt to clean, lubricate, clear obstructions or make
adjustments to the machine while it is in motion or while the
engine is running.
4. Follow good shop practices:
- Keep service area clean and dry.
- Be sure electrical outlets and tools are properly
grounded.
- Use adequate light for the job at hand.
5. Before applying pressure to a hydraulic system, make sure
all components are tight and that hoses and couplings are
in good condition.
6. Relieve pressure from hydraulic circuit before servicing or
disconnecting from tractor.
7. Clear the area of bystanders, especially children, when
carrying out any maintenance and repairs or making any
adjustments.
8. Place stands or blocks under the frame before working
beneath the machine.
9. Before resuming work, install and secure all guards when
maintenance work is completed.
10. Keep safety decals clean. Replace any decal that is dam -
aged or not clearly visible.
11. Always make sure working area is clear of tools, parts, other
persons and pets before you start operating the machine.
12. Chock wheels if machine is raised.
13. On towed implements, disconnect wiring harnesses from
tractor before servicing electrical system components or
welding on machine.