14
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
SOLUTION
Not able to keep guide wheel in track
1. Guide wheel not low enough
2. Hydraulics not on “Float”
3. Side linkage set too rigid
1) Guide wheel should be at least to mid
point of wheel horizontal to ground
level
2) Put hydraulic lever in “float” position
3) Loosen side linkage to allow more
side movement
Not able to keep guide wheels in the track
when filling inner tracks closest to pivot
point
Not compensating for tighter turns
Run the outside tractor wheels as close to
the pivot track as possible. (Outside
wheels are the wheels furthest from the
pivot point)
Throwing too much dirt/making a hill
Front blades digging too deep
1) Adjust pitch of machine to raise front
blades
or
2) Remove front blades (on OR600
“Track King” models only)
NOTES:
