— 1 —
This manual is intended as a guide for the service center. The details and functional descriptions will assist with any possible repairs to the
Norton Clipper high-Speed gas Saws CP512-300i or CP514-350i ilube®.
We recommend that only Norton Clipper – Original parts are used for all repairs. This will ensure proper repair work and faultless operation
of the machine.
contents:
chapter 1
ChECk OF OIl lEVEl AND ASSOCIATED COMPONENTS
chapter 2
TESTINg OF ThE OIl SUPPly AND SUPPly TO ThE CARbURETOR
chapter 3
TESTINg ThE ENAblINg SySTEM FOR ThE IgNITION MODUlE ElECTRONICS
chapter 4
TESTINg ThE gENERATOR g1 AND FAUlT FINDINg
chapter 5
gENERAl INFORMATION AbOUT ThE SENSOR IN ThE OIl PUMP ElECTRONICS A2
chapter 6
gENERAl INFORMATION AbOUT ThE ExTERNAl MAINS
chapter 7
VOlTAgE IMPUlSE AND MEASUREMENT AT OIl PUMP ElECTRONIC A2
chapter 8
TESTINg OF ThE OIl PUMP ElECTRONIC A2
chapter 9
OPERATINg METhOD OF ThE ElECTRO-MAgNETIC OIl PUMP
chapter 10
TESTINg OF ThE ElECTRO-MAgNETIC OIl PUMP
chapter 11
SPECIFIC ChECk OF ThE OIl PUMP
required General resources
1. Voltage source: alternating voltage min. 12 V~/ min. 1Amp.
2. A digital multi-meter with separate bar indicator.
3. Schematic diagram for a quick fault diagnosis
Figure 1.1 - Voltage Source
Figure 1.2 - Multi-Meter
cP512-300i & cP514-350i HIGH-sPeeD GAs sAWs
TROUblE ShOOTINg MANUAl
