21
IV. PARTS LIST SECTION
A. Ordering Information
1. List model number and serial number of machine from the Machine’s Serial
Number Plate.
2. List part number, UPC number, and Description of part DO NOT use the
item number.
3. Wherever alternate parts are shown due to product improvement, inspect
the part you have and provide additional description as necessary.
4. Specify mode of shipping desired, such as, parcel post, truck, U.P.S., best
way, etc.
For the nearest Norton Clipper distributor call
254-918-2310
Common Replacement Parts
Description UPC
Part
Number
BELT Poly-V 10 PK 698MM
70184643371
232344
Blade Shaft Nut ¾-16 Left Hand Thread (Operators
Right Side Of Saw)
70184673903
227156
Blade Shaft Nut ¾-16 Right Hand Thread (Operators
Left Side Of Saw)
70184674346
227191
Collar Tight (Operators Right Side)
70184673904
227159
Collar Tight (Operators Left Side)
70184674352
227190
Collar Loose Assembly (With Pin)
70184674082
227247
Drive Pin
3/8 x 1
70184674556
227154
Water Tank Complete C1318P
00310351798
232356
Bearing Blade Shaft W/Hardware (1)
00310004295
72474
Front Wheel Complete W/Hardware (1)
00310006552
82786
Rear Wheel (1)
00310005495
80991
Wrench 1-1/2”
70184649317
105377
Wrench 32mm
70184681049
82910
Wrench 17mm
70184655806
72279
NOTE: All Parts Are Sold As Individual (each) Unless Noted Otherwise
Blades Use Only Clipper Diamond Blades.
Contact your local Norton
Clipper Distributor or our Customer Service at 254-918-2310 for the best blade for
the application.
All parts are designated as either Service Parts (S) or Wear Parts (W) in the Type
column in the parts listing. Wear parts are worn out through normal use of the
machine. The wear period depends on the intensity of use of the machine,
handling, and maintenance of the machine. Wear parts must be serviced and
eventually changed following the indications of the manufacturer. Any wear due to
normal use of the machine will not be considered as a case of warranty for items
designated as Wear Parts (W). For best performance and life Genuine Norton
Clipper replacement parts should always be used. Changes to part specifications,
are subject to change with out notice.
