background image

motors, and fans also generate noise pulses. Because radio frequencies are susceptible to these noise 

pulses, you may occasionally hear them in your handsel. Generally, they are minor annoyances and 
should not be interpreted as defects in your system. 

RANGE: Because radio frequencies are used, location of the base unit can affect operating range. Try 

several locations in your home or business and pick the one that gives you the clearest signal. 

INTERFERENCE: Some electronic devices operate in and/or generate interference near the operating 
frequencies of your cordless telephone. While several protection circuits are used to prevent unwanted 

signals, there may be periods when these unwanted signals cause interference. If interference occurs 

frequently, it can be minimized or eliminated by lowering the height of your base antenna or by relocating 

the base unit. You can check for interference before selecting the final base unit location by plugging in 

the phone, dation in cordless reception. Keep the handset batteries charged as much as possible. Weak 

handset batteries can limit the range of cordless operation. 

Summary of Contents for Excursion 36000


















Reviews: