background image

 
 
 
 

RINGER ON/OFF Switch

 - Used to turn the ringer ON or OFF.   

 
TONE/PULSE Switch

 - Allows you to switch the dialing mode to either Pulse or Touch 

tone dialing. 
 

 
Wall Mount Bracket

 - Allows you to 

mount the phone on the wall. Use if 
desk or table space is limited. See  
figure 1. 

 
 

 
 
 
 
 
 
 
 
 
 

 
INSTALLATION

 

 Desktop Connection

 

Select a location near a telephone 
modular wall jack.  
1. Plug one end of the telephone line 

cord into the LINE jack on the rear 
of the 58100.  

2. Connect the other end of the 

telephone line cord into the 
telephone modular jack located on 
your wall.   See figure 2. 

 
 
 
 
 
 
 
 
 
 
 
 

 

(Figure 2)

 

Wall Use

 

(with a standard AT&T or GTE modular wall jack) 

1. Connect the short telephone line 

cord into the LINE jack on rear of 
the base unit. 

2. Route the short telephone line cord 

through the small hole on the upper 
right hand side of the wall mount 
bracket. 

3. Install the wall mount bracket as 

shown on figure 3. 

4. Insert the opposite end of the 

telephone line cord into the 
telephone modular wall jack. 

5. Align the wall mounting slot with 

the studs located on the modular 
wall plate and slide the base down 
to lock in place.   See figure 3.  

 
 
 
 
 
 
 
  
 

 
 
 
 

(Figure 3) 

 
Handset Retainer Tab Installation

 

If the base unit is to be placed in the 
wall mount position, the handset 
retainer tab must be pulled out, turned 
around and placed in the opposite 
direction, so that the tab allows the 
handset to hang onto the base unit, as 
shown in figure 4. 

 

 

(figure 1) 

Summary of Contents for EasyTouch 58100









Reviews: