010508A-1 12
when you place a call, press the
SPEAKERPHONE button and listen for
a dial tone. Adjust the speaker volume
to a comfortable listening level.
Handset Volume Nor/Hi
Allows you to adjust handset receiver
audio level. Set the switch to Nor for
Normal or set Hi for High Volume.
Placing a Call
Lift the handset or press the
SPEAKERPHONE button and listen
for a dial tone. Dial the desired phone
number.
NOTE:
If you do not hear a dial tone
after pressing the SPEAKERPHONE
button, adjust the VOLUME control
located on the right hand side of the Big
Button Plus 20270.
Receiving a Call
When the phone rings, lift the handset or
press the SPEAKERPHONE button, and
start conversation with the caller.
NOTE: If you cannot hear the caller,
adjust the VOLUME control to a desired
listening level. If the callers cannot hear
you, speak closer to the base unit.
Ending a Call
Upon completion of a call, you can hang
up the Big Button Plus 20270 by
returning the handset back into the
handset cradle on the base, or by
pressing the SPEAKERPHONE button
( if the speakerphone mode was initiated)
Last Number Redial
The last number redial feature may be
used to dial the last number called (up to
32 digits).
1. Pick up the handset or press the
SPEAKERPHONE button and listen
for a dial tone.
2. Depress the REDIAL button. The
phone number dialed last will be
dialed out automatically.
Flash
Pressing this button momentarily hangs
up the phone to access custom calling
features such as Call Waiting or Three-
Way Calling provided by your local
phone company. For other Custom
Calling features, refer to the instructions
provided by your local phone company.
Redial/Pause
When the line is busy hang up the
phone, then lift the handset press , press
this button will automatically dial the
last number called. Press this button to
insert a 4-second delay between dialed
numbers in PABX systems or long
distance services.
Using Memory Dial
You can store up to 13 frequently called
telephone numers(each up to 16 digits)
with your Big Button Plus 20270. Three
emergency numbers can be dialed at the
touch of a button and ten additional
numbers which can be accessed by using
the MEMO button.
NOTE:
Telephone numbers can be
stored in the TONE or PULSE mode.
3.
4.
To Program the 3 Emergency
Numbers
1. Lift the handset and listen for a dial
tone.
2. Press and release STORE
BUTTON.
3. Enter the number to be stored. (The
telephone number will not dial out.)
4. Press and release the STORE
BUTTON.
5. Press the corresponding emergency
buttons for each of the emergency
numbers you wish to store:
Summary of Contents for Big Button Plus 20270
Page 18: ...17 010508A 1 20270 010508A 1 ...
