Chapter 3: Chiller and Coolant
© 2017 Cutting Edge Optronics, Inc.
10
Patara-IR TEM
00
Laser Pre-Installation Guide
Chiller Plumbing
Plumbing for the Patara laser is described in Figure 3-1.
CHILLER
COOLANT:
OPTISHIELD® Plus
½ NPT
to 3/8
barb
3/8 reinforced
Hose (~8')
INLET
FROM
“LASER
COOLANT
OUT”
CAPACITY
~1.1 U.S. gallons
¾ NPT
to 3/8
barb
¾ NPT
to 3/8
barb
½ NPT
to 3/8
barb
3/8 reinforced
Hose (~18")
3/8 reinforced
Hose (~6')
OUTLET
TO
“LASER
COOLANT
IN”
Figure 3-1 Chiller Plumbing
Standard NG CEO Supplied Hardware
1.
Patara Laser head
2.
eDrive
3.
Chiller
4.
Laser signal cable- Length 7 ft. (2.1 meters)
5.
Diode power cable- Length 7 ft. (2.1 meters)
6.
Plumbing Kit, including hoses and filter for chiller- Length 8 ft (2.4 meters)
7.
Hose length may be modified to suit facility requirements
8.
Power Cord for Chiller
9.
Power Cord for eDrive
Suggested Chiller Models
NG CEO has used Polyscience chillers for long time. Other chillers with similar
specifications may be used. The customer may decide to buy a chiller through NG CEO
or purchase directly from the third party. When supplied by NG CEO, the following
models are specified for use with the Patara-IR TEM
00
laser.
