23
2.
A
tt
ach the drill template (supplied) to the place where you
want to install the camera, and then drill the screw holes and
the cable hole (op
ti
onal) on the ceiling according to the drill
template. The cable can also be routed through the side. Use
pliers to remove the plas
ti
c tab if rou
ti
ng cables through side
outlet on trim ring.
Note:
Cable hole is required when adop
ti
ng ceiling outlet to route the
cable.
Screw Hole
Cable Hole
Figure 2. 14
Drill Template
3.
Connect the corresponding power and video cables and
route them as desired.
4.
Secure the camera to the ceiling with the supplied expansion
screws
Note:
In the supplied screw package, both self-tapping screws and
expansion blots are contained.
Summary of Contents for TVID212IR2
Page 8: ...7 3 3 9 ADJUST 40 3 3 10 RESET 41 3 3 11 EXIT 41...
Page 43: ...42...
