Page
2
of
2
TELEHANDLER
Aug 2018
NORTHERN HIRE GROUP PTY LTD
134 Ogilvie Avenue, Echuca 3564
(03) 5482 6262
5. Load capacity chart
Do not operate a telehandler without the proper load capacity chart. It is critical that the load chart
in the telehandler matches the machine and the attachment you are using before lifting the load.
Load charts should always be clearly legible and visible to you while you are set up in the normal
operating position.
6. Know your load
Make sure that the weight and centre of gravity of the load does not exceed the telehandler’s or
attachment’s maximum capacity according to the load chart. Evaluate the dimensions of the load to
determine proper load handling techniques. Always secure the load to minimize the potential for
falling debris.
7. Personnel and suspended loads
Remember that there are additional restrictions placed on the operator, owner and user of the
equipment when using a telehandler to lift personnel and suspended loads. Always refer to the
ANSI/ITSDF B56.6 standard, OSHA Regulations, and the telehandler and attachment
manufacturer’s instructions regarding the additional requirements and operating instructions for
these applications.
8. In the cab
Always wear your seatbelt while operating the telehandler. Adjust the seat and steering wheel so
that you can easily reach all of the machine controls. Adjust side and cab mirrors to maximize
visibility
9. Stability triangle
Ensure that the combined centre of gravity of the telehandler and the load always remains within the
stability triangle. Good operating habits that can help are:
•
Make sure the chassis is level before handling a load and never use the sway feature with an
elevated load.
•
Keep the boom and load as low as possible during travel.
•
Operate the machine at speeds that will keep the machine and load under control at all times.
10. Tipping safety
Do not jump from the machine if your telehandler tips over. Remain in the cab, stay in the seat with
your seat belt fastened and brace for impact by grasping the steering wheel and leaning away from
the point of impact.
Keep these tips in mind, and you will be able to prevent incidents from happening while
operating a telehandler on any jobsite.
