NVR4POE / NVR8POE Quick Operation Guide
18
To log directly into a camera click on the cameras IP address under the Connect tab. You will then be
prompted to enter the cameras username and password. Once you have entered the camera login information
you will enter the cameras set up software and have access to advanced camera features.
For all settings not covered in this section please refere to the users manual for detailed
information.
Menu Operation
Menu Structure
The menu structure of DS-8600NI-E8 and DS-7700NI-E4 series NVR.
The menu structure may vary according to different models.
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Steps:
1.
Check the power supply is plugged into an electrical outlet with correct voltage. It is HIGHLY recommended
that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
2.
After connecting the power supply (NVR4POE) or power cord (NVR8POE) to the NVR, flip the power
switch to the “ON” position represented by a (
•
) on the NVR4POE and a (
) on the NVR8POE
3.
The Power LED should turn green and the unit will begin to start. After the device starting up, the wizard
will guide you through the initial settings, including modifying password, date and time settings, network
settings, HDD initializing, and recording. It is HIGHLY recommended to change default passwords.
Summary of Contents for NVR4POE
Page 1: ......
